WATTBRICKS MP330, User Manual

Page: 10 / 20

LCD DISPLAY
www.wattbricks.com
08
H: Battery Level Indicator
I: Input Status
J:DC Outputs Status
K:AC Outputs Status
L:USB Outputs Status
I J
H
L K
Battery level indicator
The battery level is provided by percentage of battery charge corresponding to the number of
bars and percentage displayed. The segments in the battery level correspond to the current
state of charge, 0-5% empty, 6-20% one segment, 21-40% two segments, 41-60% three
segments, 61-80% four segments, and all five are lit when charge level is above 81%.
Provides the user live telemetry data on time to completely charge, or deplete the battery based
upon the energy entering or leaving the battery.
Highly recommend to fully charge product when first use. Higher battery level indicator show,
more precise the data will indicate.
Please be aware that this value can adjust multiple times as the energy draw changes from the
connected devices. This is evident during initial activation of ports with a connected device.
Recommended back to charge the product when battery indicate less than 20%. Note that when
you first plug in a power source, whether it's a solar panel or a wall charger, the product may
take a minute to detect and adjust its charge circuitry before it starts drawing power from the
source.
Input status :
The product is capable of providing input energy in watts.
DC output status :
The display will provide output watts of the DC port.
AC output status :
The display will provide output watts of the AC port.
USB output status :
The display will provide output watts of the USB port.
Power-saving mode:
when the device enters the input or output state, it will enter the screen-off mode after more
than 20 seconds, which does not affect the normal operation of the device. When the output
power of the device is less than 5W, the device will go into hibernation after more than 3 hours,
and the input can be "awakened" when the input is charged or any button is pressed. When not
in use, press the switch button to turn off the output.