5 Seven 3-Leg Desk Assembly | INS-SN3LEGTABLE
C on nec t Sw i t ch
A
Position the worksurface on or near the leg
frame and connect the switch through the rail
opening.
B
Align the worksurface and secure with ¼-20x⅜”
Phillips Pan Head Machine Screw (126665 x18).
Tes t + Level
A
Plug power into 110V AC receptacle
and depress the down arrow to
initialize desk. The desk will travel
down a fraction of an inch then stop.
The desk is now ready to travel up and
down using the switch.
B
Position the desk, maintaining a
minimum 1” gap per ANSI/BIFMA safety
standards.
C
Adjust leveling glides to ensure a
stable sit-stand performance.
D
Attach Wire Managers. Use #8x⅝”
Truss Head Panhead Screw to secure
wire clips as needed.
Note
— Clear all cables from the rail edge to
prevent pinch when securing the worksurface.
Note
— Two people may be required to install
large surfaces.
5.
6.
B
B
A
A
C
C
D
