3 C9 CART & GARAGE ASSEMBLY INSTRUCTIONS
Detach Side-screen
The side-screen comes pre-installed per the handedness on the
order. If reversing the hand is needed, remove the four M6 low
profile screws that attach the screen, two at the top and two at
the bottom of the screen, using a 3mm Hex Key and set aside.
Removing Screen
Slide screen downward until the top corners are able to be pulled outwards. Then slide screen upwards and
outwards from the cart, fully removing the screen. Follow these instructions in reverse on the other side of
the unit, inserting the bottom tab into the unit, then pushing forward and in place. Reattach with the four M6
screws.
Reversing Cart Handedness
1.
2.