MAINTENANCE
60
5.
Loosen the retaining bolt(s) (A) of pressing
shoe (B) a few turns. Fit the shims (C) or
remove them, until the correct number of shims
is present. See §
11.1.7
. Tighten the retaining
bolt(s) of the pressing shoe with the correct
torque. See §
11.1.6
.
6.
Check the inspection window gasket for
damage and replace if necessary. Refit the
inspection window (B). Make sure that all bolts
(A) are refitted and that they are tightened in the
correct order, diagonally opposite each other, to
the specified torque limits. See §
11.1.7
.
7.
Switch on the electrical supply.
8.
Jog the motor until the second pressing shoe is
positioned in front of the inspection window.
9.
Isolate the pump from the electrical supply.
10.
Repeat the procedure for this pressing shoe by
repeating steps 4, 5, 6 and 7.
11.
Refill the lubricant via the breather. See §
8.4
.
A
C
B
3
1
2
4
C
A
B
Summary of Contents for Bredel 265
Page 2: ...2...
Page 95: ...NOTES 95 Notes NOTES...
