Watson Industries, Inc.
DMS-EGP01 Rev A 02/12/2015
21
Setting Altitude Correction:
Activate Command Mode (See above).
To set the velocity mode, type &.
This will bring up the menu:
Typing in ‘6' will bring up this menu:
To turn on Altitude Correction type ‘1’.
To shut off Altitude Correction type ‘2’.
To make this selection the default the next time you power the unit on type in " (a quote mark.)
TYPE IN THE NUMBER OF YOUR SELECTION (OR 'Q' TO QUIT):
1 = ADJUST TIME CONSTANTS
2 = SET OUTPUT CHANNELS
3 = LIST CURRENT OUTPUT CHANNEL SELECTION
4 = SELECT HEADING SOURCE
5 = SELECT VELOCITY SOURCE
6 = SELECT ALTITUDE CORRECTION
7 = SET NEW BAUD RATE
SELECTION ALTITUDE CORRECTION (OR 'Q' TO QUIT):
1 = GPS GEODETIC CORRECTION
2 = NO CORRECTION
