P a r a m e t e r s , C h a p t e r 6
Wa t l o w P o w e r S e r i e s
■
6 . 1 7
NOTE: For more information about how parameter settings affect the controller’s operation, see Chapter Five, Control
Methods and Features.
Active: Always.
51 r
n/a
[```0]
to
[`680]
(0 to 680)
[ratU]
Unit Voltage Rating
(Volts)
Reads load voltage of
the unit.
Active: Always.
30 r
n/a
[``)0]
to
[(999]
(0 to 9999)
[Sbld]
Software Build
Number
Reads software build
level of the unit.
Active: Always.
4 r
n/a
[``)0]
to
[(999]
(0 to 9999)
[SUEr]
Software Version
Reads software ver-
sion of the unit.
Active: Always.
7 r
n/a
[``)0]
to
[(999]
(0 to 9999)
[HUer]
Hardware Version
Reads hardware ver-
sion of the unit.
Active: Always.
5 r
n/a
[``00]
to
[``99]
year
(00 to 99)
[``00]
to
[``99]
month (00 to 52)
[date]
Manufactured
Date (yymm)
Reads month and
year of manufacture.
Active: Always.
2 r
n/a
[```0]
to
[9999]
(0 to 9999)
[`Sn_]
Unit Serial Num-
ber Low Digits
Reads the low digits
of the serial number
of the unit.
Active: Always.
1 r
n/a
[```0]
to
[9999]
(0 to 9999)
[`Sn–]
Unit Serial Num-
ber High Digits
Reads the high digits
of the serial number
of the unit.
[InFo]
Unit Information Menu
[Fcty]
Factory Page
This menu is used to read unit information that is stored during manufacture.
Active if
[glOC]
is set to
[`Unl]
.
1359 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
[diAg]
Diagnostics Facto-
ry Menu Lockout
Sets lock on diagnos-
tics menu.
Active if
[glOC]
is set to
[`Unl]
.
1358 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
[dAtA]
System Data
Factory Menu
Lockout
Sets lock on system
data menu.
Display
Parameter
Range
Default
Modbus
Conditions for
(Modbus Value)
Address
Parameters to Appear
read/write
Summary of Contents for PC1X-N20
Page 4: ...ii Watlow Power Series Table of Contents...
Page 72: ......
