Active if
[glOC]
is set to
[`Unl]
.
Active if retransmit and heater
diagnostics options are
installed.
1357 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
[C|rtr]
Retransmit Cal
Factory Menu
Lockout
Sets lock on retrans-
mit calibration
menu.
Active if
[glOC]
is set to
[`Unl]
.
1356 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{`CIn}
Analog Input Fac-
tory Menus Lock-
out
Sets lock on input
calibration menu.
Active if
[glOC]
is set to
[`Unl]
.
Active if retransmit and heater
diagnostics options are
installed.
1355 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{retr}
Retransmit Setup
Menu Lockout
Sets lock on retrans-
mit menu.
Active if
[glOC]
is set to
[`Unl]
.
Active if serial communications
option is installed.
1354 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{COM}
Comms Setup
Menu Lockout
Sets lock on commu-
nications menu.
Active if
[glOC]
is set to
[`Unl]
.
1353 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{`Alr}
Alarms Setup
Menu Lockout
Sets lock on alarm
configuration menu.
Active if
[glOC]
is set to
[`Unl]
.
Active if heater diagnostics
option is installed.
1352 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{`Opt}
Options Setup
Menus Lockout
Sets lock on all
options setup menus.
Active if
[glOC]
is set to
[`Unl]
.
1351 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
[`Ctr]
Control Setup
Menus Lockout
Sets lock on all
control setup menus.
Active: Always.
1350 r/w
[`Unl]
(0)
[`Unl]
Unlocked (0)
[`LOC]
Locked (1)
{gLOC}
Global Lockout
Sets the state of
global lockout which
allows all prompts to
be write protected. If
set to unlocked, indi-
vidual menu locks
can be set.
[`LOC]
Global/Menu Lockouts Menu
[Fcty]
Factory Page
This menu is used to set the lockout parameters. Locked means that the parameters in the menu
cannot be changed.
Active: Always.
959 r/w
[``On]
(0)
[``On]
enable (0)
[`OFF]
disable (1)
[nUOL]
Enable NVOL
Storage
Enable/disable non-
volatile memory.
6 . 1 6
■
Wa t l o w P o w e r S e r i e s
P a r a m e t e r s , C h a p t e r 6
Display
Parameter
Range
Default
Modbus
Conditions for
(Modbus Value)
Address
Parameters to Appear
read/write
Summary of Contents for PC1X-N20
Page 4: ...ii Watlow Power Series Table of Contents...
Page 72: ......
