Watkiss Vario, Operating Manual

Page: 67 / 110

63
REAR FEEDOUT
CONVEYOR
(OPTIONAL)
The rear feedout conveyor is an option to allow rear
delivery from a floor base into a jogger.
Feeding to the Rear
When delivering to the rear of the floor base, the rear
deflector lever should be pushed down so that the fingers
(A) deflect the paper to the rear.
When delivering to the rear the
DIVERT
function is not
available. If the collator stops because of a miss or double
feed the set with the error(s) will be on the top of the stack.
PAPER JAMS If a paper jam occurs in the base, the drive mechanism
is automatically disengaged. If required, remove the rear
guard and/or booklet maker etc. and remove any jammed
sheets. Replace the rear guard and touch
to continue
the job.
REMOTE CONTROL
(OPTIONAL)
The remote control handset (supplied with the Stitch-Fold
unit and also available separately P/N 42-260) can be
used to control certain functions on floor standing Varios.
The remote control interface socket is located on the front
of the base on the right hand side.
Rear Feedout Conveyor
Rear Feedout Conveyor
and Jogger
Feeding to the Rear
A