Watkiss Vario, Operating Manual

Page: 38 / 110

34
1. Load the sheets face
up and with the first
page in the uppermost
bin to give face up de-
livery to the rear or face
down delivery to the
front.
2. Load the sheets face
down and with the first
page in the bottom bin
to give face down deliv-
ery to the rear or face up
delivery to the front.
For on-line booklet making at the rear of a bench top
machine, use method 1.
When using the Vario rear corner stapler, use method 2,
with the corner to be stapled loaded outermost.
Tray Extenders
For large sheet sizes (over A4, 8½ x 11") or when running
A4 (A4, 8½ x 11") portrait it will be necessary to fit tray
extenders to support the sheets.
One B3 (14¼ x 20¼") tray extender is supplied as stand-
ard with each SlimVAC bin.
An optional tray extender is available for running A4
portrait (8½ x 11") P/No. 251-303.
Rubber Endlays
Rubber endlays are used to control the paper stack in the
tray. Two different types are supplied with the machine.
It is important that the correct endlay is used in the correct
orientation for the paper size in use. Do not push the
endlay hard up against the edge of the paper stack.
Load sheets
face up
#1
#2
#3
#3
#2
#1
Load sheets
face down
Tray Extenders