Watkiss Vario, Operating Manual

Page: 25 / 110

21
When feeding to the rear of the collator, select
BOTTOM
to feed a sheet from the bottom bin with the last set of
each batch. The inserted sheet will be at the bottom of
the batch pile, as the backing board for a pad for example.
OSCILLATE OSCILLATE
, when selected from the Batch window, off-
sets the stack after each batch if an X-Jogger or Oscillat-
ing Bench Base is fitted. This is used to separate each
batch.
STOP STOP
causes the machine to stop after each batch, and
the counter display will flash. Touch the start button to run
another batch.
If
STOP
is selected while the machine is part-way through
collating a batch, it will stop once it has completed that
batch. This allows the operator to interrupt a job at a
convenient point.
PAUSE / SEPARATE PAUSE / SEPARATE
causes the machine to pause for
approximately 5 seconds after each batch. The pause
icon on the control panel will flash between batches.
This function will also separate batches on a booklet
maker outfeed conveyor. The pause time can be altered
on the Machine Options page (touch
MENU
,
MACHINE
OPTIONS
).
RESTART BATCH
Touching
RESTART BATCH
zeros the batch counter, so
that you can restart a batch. Note that if the collator is
running, this button will interrupt a batch that is partly
completed, and a new batch will be started.