C. TEMPERATURE CONTROLS: The set temperature range is from 50°F to 104°F (10°C to 40°C).
The factory-set temperature of the spa water is 102°F (39°C). Whenever power is disconnected and then reconnected to the spa, the
water temperature will automatically seek this temperature, unless you set it otherwise using the temperature controls.
Pressing the Temp Plus (+) button displays the spa’s set temperature. To increase the set temperature, press the Temp Plus (+) button
again, once for each degree of increased temperature desired. If you hold the button down, the set temperature will increase by one
degree every half-second.
To decrease the set temperature, press the Temp Minus (-) button, once for each degree of decreased temperature desired. If you
hold the button down, the set temperature will decrease by one degree every half-second.
D. CIRCULATION CYCLE LED: The circulation cycle LED will illuminate when the circulation cycle is activated. See the Circulation
Cycle section of this manual for instructions on activating the circulation cycle.
28
™
Summary of Contents for Solana
Page 1: ...Watkins Manufacturing Corporation OWNER S MANUAL...
Page 2: ......
Page 61: ...NOTES 59...
Page 62: ...NOTES 60...