CAUTION!
DO NOT
look directly or stare at the UV light. DO NOT operate lamp
module outside of purifi er housing.
CAUTION!
To replace the lamp module, press “ON/OFF” switch to “OFF” position
(see diagrams on page 7).
Always be sure to unplug power cord from wall outlet and allow to cool
completely before changing lamp module.
CAUTION!
To reduce the risk of electrical shock, DO NOT disassemble, tamper with
housing, or attempt to repair the purifi er. NO user serviceable parts inside.
Refer servicing to qualifi ed service personnel.
Th e Airwise Purifi er is not a medical device. DO NOT stop or alter any
medical therapy programs or medications without the advice of your
physician.
SAVE THESE INSTRUCTIONS
Airwise Air Purifi er Use & Care Guide
3
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
ATTENTION
CAUTION! TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT ATTEMPT TO REPAIR.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
To reduce the risk of electrical shock,
housing, or attempt to repair the purifi er.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
module outside of purifi er housing.
To replace the lamp module, press “ON/OFF” switch to “OFF” position
To replace the lamp module, press “ON/OFF” switch to “OFF” position
To replace the lamp module, press “ON/OFF” switch to “OFF” position
To replace the lamp module, press “ON/OFF” switch to “OFF” position
To replace the lamp module, press “ON/OFF” switch to “OFF” position
To replace the lamp module, press “ON/OFF” switch to “OFF” position
