Waterway SANTANNA 750-1011-280 Instructions Download Page 4

Page: 4 / 4

810-0037.0908

INSTALLING THE GUNITE AIR INJECTOR CAP

0.125" diameter holes

(29 qty.)

fits into 1 ½"

schedule 40 pipe

GUNITE AIR INJECTOR CAP

672-2000

GUNITE AIR INJECTOR CAP DIMENSIONS

1 1/2" pipe, capped, stubbed

Fits in 1 1/2" Schedule 40 PVC pipe.
Pipe cuts flush with finish coat,
ready for gunite air injector.

Optional Seat

Installation

Gunite Spa

Typical “Four in the Floor”

Installation

1 ½" PVC Reduced from

2" PVC Run in from Flower

1.20"

2.00"

diameter

1.00"

.20"

Summary of Contents for SANTANNA 750-1011-280

Page 1: ...2 NUMBER OF AIR HOLES The air holes in the spa floor and or seat release the air perpetuated by the blower through the 2 air line Table 2 below gives the most common air hole sizes and the correspond...

Page 2: ...ll as illustrated If switch is not used tie one line to one load tie the other line or neutral to the other load 4 GROUND ALL UNITS 5 ADDITIONAL GROUNDING NOTE Double insulated plastic blowers do not...

Page 3: ...r from the date of purchase Products which fail or become defective during the warranty period except as a result of freezing accident negligence improper installation use or care shall be repaired or...

Page 4: ...GUNITE AIR INJECTOR CAP 672 2000 GUNITE AIR INJECTOR CAP DIMENSIONS 1 1 2 pipe capped stubbed Fits in 1 1 2 Schedule 40 PVC pipe Pipe cuts flush with finish coat ready for gunite air injector Optiona...