810-0187.1009
© 2009 Waterway Plastics
5. Pull knob out from the housing approximately 2" until it snaps
into place.
7. Thread hose onto the spa drain.
9. To disconnect the hose, push the hose inward approximately ½"
to shut the water flow off. Unthread the hose.
8. Pull the hose outward to allow water to flow. Push inward to
shut water flow off.
10. Thread the cap back on then push the internal back into the
housing until it snaps into place.
6. Remove cap by unthreading counter clockwise.
