810-0180.0109
© 2009 Waterway Plastics
9. Always use at least one non-adjustable internal per spa to
prevent deadheading pump.
10. Align tab behind escutcheon face with slot on wallfitting. Location of slot and tab are shown
below. Push Poly internal into wallfitting until it snaps into place. To reduce water flow, turn
clockwise. To increase water flow, turn counter-clockwise until it stops turning. To remove,
continue turning counter-clockwise past stopping point. You will hear a snap to confirm release
of Poly internal.
Always use at least one Non-Adjustable internal
per spa to prevent deadheading pump.
Large Volume
212-8040G - White
17-20 GPM
Twin Roto
212-8120G - White
10 GPM
Massage (7 Nozzle)
212-8030G - White
10 GPM
Wrench
218-1790
Handheld Jet
210-3250
10 GPM
Directional
212-8050G - White
10 GPM
Roto
212-8010G - White
10 GPM
Power Storm II
212-8250G - White
10 GPM
Multi Massage
212-8270G - White
10 GPM
Galaxy Massage
212-8530G - White
10 GPM
Galaxy
212-8190G - White
10 GPM
To prevent personal injury, shock, or property/equipment damage, an Air Spring
Check Valve (2" 600-8160, 1 ½" 600-8140) must be installed on the blower stand
pipe in case of a water backup in the air line.
NOTE
: If a blower is not being used, please direct the air intake toward the ground
using the 2" Sweep Vent Grate Assembly (400-4130) on the Air Inlet Pipe.
Wall
Adjustable
(212-8050G)
Adjustable Pulsator
(212-8120G)
Adjustable Roto
(212-8010G)
Adjustable Massage
(212-8030G)
Remove
for Non-Adjustable
(217-1090)
Wall
Poly Storm Jet Internal
8.3125"
min. length
5.989"
4.290"
4.640"
1" SCH 40
PVC Pipe
(not supplied)
Slot on face of
wallfitting
Niche
(425-5030)
(not supplied)
2 ½" SCH 40
PVC Pipe
(not supplied)
1 ½" Socket
Air
2" Socket
Water
Blower
Water Flow
Water Flow
Air
Flow
UL Listed
Check Valve
Air Intake
Sweep Vent Grate Assembly
(400-4130)
Air
Flow
Air Inlet Pipe
POLY STORM JET INTERNALS AND ACCESSORIES
9
10
Tab behind poly
escutcheon face
