20
Volt 550Li Calibration Procedure
x 5
x 1
Only follow the instructions below if instructed to by Water Tech or the
Troubleshooting / FAQs section.
Make sure that the batteries are FULLY CHARGED and the unit is
OUT OF WATER before calibrating.
Calibration Procedure:
Read all instructions before attempting to calibrate robot.
1. Turn ON the robot.
3.
The “Floor Only” LED light will flash
rapidly to indicate proper entry.
2. Within 5 seconds of turning the robot ON,
press the “Cleaning Mode” button 5 times.
4. Wait for the “Floor Only” LED to stop
flashing,
then press the “Cleaning Mode”
button one time.
Summary of Contents for 78000RR
Page 1: ......