1
2
3
4
Turn off water supply.
Observe all local
plumbing codes.
Inspect plumbing for signs of
damage. Replace as necessary.
DO NOT
use petroleum based
products on this faucet.
REQUIRED TOOLS AND MATERIALS:
Adjustable Wrench
Flat Screwdriver
Channel Locks
Coping Saw
BEFORE YOU BEGIN YOUR INSTALLATION:
WARNING:
Cancer and reproductive harm - see www.P65Warnings.ca.gov
IMPORTANT!
• Read these instructions and plan the installation before beginning.
• Risk of product damage. Do not apply direct heat to the valve. Excessive heat will damage the plastic components and plaster guard.
• Do not remove the plaster guard until instructed to do so.
• A water supply is required for this valve.
• Component location, spacing, and situational requirements can vary.
DIVERTER TRIM
INSTALLATION
Model #:
AG231-1