A
B
D
F
E
C
COUNTER
OR SINK
1.
2.
3.
4.
Slide washer and thread the
clamp nut onto threaded shroud.
Tighten nut snug to underside of
sink or counter.
Turn faucet to the desired handle
position. Securely tighten clamp
screws (F).
FAUCET INSTALLATION
Remove clamp nut (A) and
washer (B) from threaded
shroud (C).
Fit flexible hoses (D) and rigid
sidespray tube (E) through hole on
counter or sink.
(No plumbers putty
is required. O-ring seals base).
1
2
3
4
Turn off water supply.
Observe all local
plumbing codes.
Inspect waste and water
supplies for signs of damage.
Replace as necessary.
DO NOT use petroleum
based products on this
faucet.
REQUIRED TOOLS:
PARTS INCLUDED:
2. Phillips Screwdriver
1. Adjustable Wrench
BEFORE YOU BEGIN YOUR INSTALLATION:
I N S T A L L A T I O N G U I D E
HK-THC-XX*
HANDLE BUTTON KIT (TRADITIONAL ONLY)
HK-USM1250
UNDER SINK MOUNTING HARDWARE KIT (1-1/4”)
*XX represents finish
