WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that Dow
Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound is used in the
manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended that
Teflon® tape be used to seal plastic Noryl® threaded fittings.
Filter Specifications
3
General Specifications
G9P
G10P
G12P
G13P
Filtration
1
Less Filter Media
Filter Media Capacity (cu ft)
1.0
1.5
2.0
2.5
Mineral Tank (Vortech ™)
9 X 48
10 X 54
12 X 52
13 X 54
Service Flow Rate -
Continuous
2
(gpm)
4
5
6
8
Service Flow Rate -
Intermittent
2
(gpm)
6
7
8
10
Backwash Flow Rate
3
(gpm)
5.0
5.0
7.0
7.0
Gallons Used / Backwash
130
130
156
182
Space Required
9 X 9 X 56
10 X 10 X 62
12 X 12 X 60
13 X 13 X 62
Approximate Shipping Weight (lbs)
27
32
35
40
Filter Media Selection Guide
Media
Description
Handles
Neutralizer
Granular / White / Sacrificial to water with pH < 7.0 /
Max pH correction to 7.2 / Lowest pH application 5.8 /
Must be replenished about every 3-6 months
Sediment
pH Correction
Granular
Activated
Carbon
Granular / Black / Wide application for removal of
organic and some inorganic / Must be replenished on a
regular basis / Life expectancy varies based on use
Sediment
Taste / Odor / Color
Chlorine / Iodine
Neu-Cor™
70% neutralizer / 30% Corosex™ mix / Sacrificial to
water with any pH / Max pH correction determined by
contact time used for correction of extremely low pH
down to 5.0 / Must be replenished every 3 - 6 months
Sediment (downflow)
pH Correction
Filter Ag™
Granular / Off-White / Wide application for removal of
sediment / Life expectancy is unlimited
Sediment
Filter Ag™ Plus
Light tan to near white in color / Mesh size 14 x 40 /
55 lb/ft3 / The Filter Ag Plus filter beds operate at less
than half the hydraulic loading rate vs. 20 x 40 mesh
sand and 50% of sand / anthracite or multi-media
Enhanced Particle Removal
(down to 5 microns)
