Watersnake Shadow MK II NGRC 54/54 Page 21 Owner'S Manual Download | Manualshive

Page: 21 / 32

background image

www.watersnake.com.au

21

SHADOW MK II

Watersnake Propeller Kits

(Sold Separately)

Watersnake Propeller kits contain a propeller, nut and shear pins. It is
recommended you keep a spare propeller on your boat at all times. The Mini 2-
Bladed Kit is suitable for the T-18 and T-24 motors. The 2-Bladed Propeller Kit
is suitable for 28lb, 30lb and 34lb motors. The 3-Bladed Medium Propeller Kit is
suitable for all 44lb and 54lb motors. The 3-Bladed Large Propeller Kit is suitable for
all 70lb, 80lb and 105lb motors.

55130
3 Blade Prop
(44lb-54lb)

55501
Large 3 Blade
Prop (70lb-105lb)

55131
2 Blade Prop
(28-34lb)

55500
2 Blade Mini Prop
(18lb-24lb)

WATERSNAKE MOTOR ACCESSORIES SOLD SEPERATLY
(SEE YOU NEAREST DEALER FOR MORE INFORMATION)

Watersnake Propeller
Accessory Kit

This kit is very handy and we
suggest you keep one at all times.
Consists of a propeller nut wrench,
propeller nut and shear pins.
55132

Watersnake Telescopic
Extendable Motor Handle

The Watersnake Telescopic Handle
can extend to 24” and will ﬁ t most
tiller handles. (Please note this
accessory does not ﬁ t the ASP
series of motors. 55507

«
...
19
20
21
22
23
...
»

Summary of Contents for Shadow MK II NGRC 54/54

































Reviews:

No comments

Related manuals for Shadow MK II NGRC 54/54

Brand: Yamaha Pages: 497

Brand: fadini Pages: 32

Brand: Yamaha Pages: 87

Brand: ASROCK Pages: 5

Brand: DFI Pages: 67

Brand: J&W Pages: 40

Brand: DFI Pages: 62

Brand: MSI Pages: 48

Brand: Gigabyte Pages: 92

K8T8AS - REV 3.0

Brand: JETWAY Pages: 26

Brand: ICP Pages: 50

Brand: QDI Pages: 58

Brand: trimond Pages: 43

Brand: IBASE Technology Pages: 62

Brand: MSI Pages: 106

Thunder HEsl S2567

Brand: TYAN Pages: 60

Brand: AZZA Pages: 61

Brand: ASROCK Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands