watersnake.com.au
9
BATTERY CHARGING
Charging a battery while it is powering the motor will increase the voltage
delivered to the motor. This motor can be powered by a charging battery (e.g.
charging with an alternator or solar panels) as long as the voltage it receives
does not exceed 14.5 volts. Exceeding 14.5 volts will potentially damage
electrical components in the motor and is not covered by warranty.
When you are off the water and are charging your battery at home for long
periods of time via a 240v or 110v AC charger we recommend you disconnect
the motor from the battery.
AVOID USING STORE-BOUGHT BATTERY
BOXES WITH BUILT-IN CIRCUITRY
Battery Boxes use low quality electrical components that cannot handle the
high current loads that trolling motors draw. We recommend connecting your
Watersnake motor directly to a deep cycle or LiFePO4 batteries using the
provided battery leads.
BATTERY BOX WITH
BUILT IN CIRCUITRY.
DO NOT USE!
SIMPLE BATTERY
BOX WITH NO
CONNECTIONS
OK TO USE!
Summary of Contents for ADVANCE SWS 70/36
Page 27: ...watersnake com au 27 NOTES...
