Configuring maintenance warnings
September, 2019, 715003738IVD Rev. C
63
Alternatives:
•
From the main window, place the cursor over the visual representation
of the system module for which you want to view information.
•
Obtain the serial number from the printed labels affixed to the rear
panels of system modules or inside their front doors.
Configuring maintenance warnings
Maintenance counters provide real-time usage status information that can
help you determine when to schedule routine maintenance for specific
components. You can set usage thresholds and maintenance warnings that
alert you when a component reaches the designated threshold limit. By
setting threshold limits and monitoring these usage counters regularly, you
can minimize unexpected failures and unscheduled downtime during
important work. For information on setting maintenance warnings, consult
the ACQUITY UPLC Console online Help.
Replacing the column heater’s leak sensor
Perform this procedure if you must replace the leak sensor.
Required materials
•
Clean, powder-free, chemical-resistant gloves
•
New leak sensor
Required tools
•
Phillips screwdriver
•
T20 TORX driver
Warning:
To avoid personal contamination with biologically
hazardous material, toxic compounds, or their residues, wear
clean, chemical-resistant, powder-free gloves when performing
this procedure.
Summary of Contents for ACQUITY UPLC I-Class IVD
