Waters Network Systems
User’s Manual
Page 37
PSX/MS1008-TX
o
Speed Setting
-
You can set 100Mbps or 10Mbps speed (Port 1 ~ Port 8).
o
Duplex setting
- Set full-duplex or half-duplex mode.
o
Flow control setting
– Flow control function is set to enable or disable.
Link aggregation
– Trunking provides a standardized means for exchanging
information between partner systems on a link. This allows their Link Aggregation
Control instances to reach agreement on the identity of the Link Aggregation Group
to which the link belongs, move the link to that Link Aggregation Group, and ensure
that its transmission and reception functions in an orderly manner. Link aggregation
allows you to group up to eight consecutive ports into a single dedicated connection.
This feature can expand bandwidth to a device on the network. LACP operation
requires full-duplex mode
.
For detailed information, refer to the IEEE 802.3ad
standard.
Filter database
VLAN configuration
Spanning Tree
Port Mirror
SNMP
Security Manager
TFTP Update Firmware
Configuration Backup
Reset System and Reboot.
5.6 LACP Setting
The
system priority value
is used to identify the active LACP. The switch with the
lowest value has the highest priority and is selected as the active LACP.