Waters Network Systems
User’s Manual
Page 31
PSX/MS1008 Models with Gigabit Uplink
Enable Delay Bound -
Limit the low priority packets queuing time in switch. If enabled,
the low priority packet will be sent once it exceeds the
Max Delay Time
.
Max Delay Time -
Used to set the time that low priority packets are queued in switch.
The valid range is 1~255 ms.
4.4
Protocol Related Configuration
The following functions can be set in the
Protocol Related Configuration
menu:
STP
– Disabled by default. Once STP has been enabled, you will be able to set the
system configuration and perport configuration.
SNMP
GVRP
– Disabled by default.
LACP
4.41
Perport Configuration
PortState
– Use this option to view the spanning tree status per port.
PathCost
– Use PathCost to specify the path cost of the port that the switch is using
to determine the forwarding ports. If you change the value, the switch must be
rebooted for the new value to take effect.
Priority
– Use this option to set port priority; you can make it more or less likely to
become the root port. If you change the value, the switch must be rebooted to use
the new value.
4.42
SNMP
The
SNMP Menu
is used to define management stations as trap managers and to enter
SNMP community strings. Use this menu to define a name, location, and contact
person for the switch.
4.43 System Options
The following settings can be made from the
System Options Menu
.
System Name
– Enter a name to be used for the switch.
System Contact
– Enter the name of contact person or organization.
System Location
– Enter the location of the switch.
4.44
Community Strings
Use the
Community Strings Menu
to enter the following information:
