Waters Network Systems
User’s Manual
Page 8
PSX/ES1008 Models
The following table describes the function of the LED indicators:
Ethernet Port
LED
Satus
Color
Description
Power
On Green
Power
On
On
Green
The port is connecting with the device
Blinks Green
The port is receiving or transmitting
data.
LNK/
ACT
Off .
No
device
attached
On Orange
The port is operating in full-duplex
mode.
Blinks
Orange
Collision of packets occurs in the port.
FDX/
COL
Off
No device attached or in half-duplex
mode.
Table 3-1. LED Description
3.4 Desktop
Installation
Choose a surface for your switch that is clean, smooth, level, sturdy and with a power
outlet nearby. Make sure there is enough clearance around the switch to allow
attachment of cables, power cord and air circulation.
3.41
Attaching Rubber Feet
1. Make sure mounting surface on the bottom of the switch is free of grease and
dust.
2. Remove adhesive backing from the rubber feet.
3. Apply the rubber feet to each corner on the bottom of the switch.
Figure 3-5. Attaching Rubber Feet to each corner on the bottom of the Switch
