Waters Network Systems GSM2109/GSM1009-SFP User’s Manual Page 15
3.6.1 Attaching Rubber Feet
1. Make sure the mounting surface on the bottom of the switch is free of grease and
dust.
2. Remove adhesive backing from the rubber feet.
3. Apply the rubber feet to each corner on the bottom of the switch.
3.6.2 Power
On
Connect the power cord to the AC power socket on the rear panel of the switch. Check
the power indicator on the front panel to see if power is properly supplied.
4.0 Network
Applications
This section provides samples of network topology in which the GSM2109/1009 switch
can be used. This model switch is generally used as a desktop, workgroup or edge
segment switch.
Desktop Application
The GSM2109/1009 switch provides an ideal solution for small workgroups. The switch
can be used as a standalone switch to which personal computers, servers, and print
servers are directly connected to form a small workgroup.
Segment Application
For enterprise networks where large data packets are constantly processed, this switch
is suitable for department users to connect to the corporate backbone. The switch
automatically learns node addresses, which are subsequently used to filter and forward
all traffic based on the destination address. You can use any of the copper ports or the
mini GBIC port to connect with another switch to interconnect each of your
small-switched workgroups to form a larger switched network.
4.1 Network
Configuration
This section explains how to configure console management via a direct connection to
the console port of the switch. Console management involves the administration of the
