Waters Industries SUNCATCHER SW-9374, Manual, Page: 3 / 16

3
Read all danger, warning, and caution statements before operating this device. Do
NOT look directly at the UVC bulb or shine on skin. Keep out of reach of children. Keep
this manual for future reference.
OPERATING INSTRUCTIONS
This appliance contains a UV emitter. Do not stare at the light source.
40˚ 40˚
OFF
ON
OFF
6 sec.
6 inches
1
2
3
4
Install Batteries
• Open the battery cover. Insert 4 new AA Alkaline
batteries (not included) into the battery compartment
and close the cover. (Fig. 1)
Turning On Wand
• Press the blue power switch. (Fig. 2)
Note: UVC bulb will only turn on when the bulb is pointed
downward. This safety feature includes a switch that will
make a rattling sound — this is a normal function. (Fig. 3)
Sanitize
• Move the wand slowly (1 inch per second) over hard
surface keeping the wand 1/2 inch from surface, then
reverse direction to re-expose the same area. Repeat for
a total of 4 passes over same area. (Fig. 4)
Note: Germs, viruses, and bacteria are sanitized when
UVC light shines directly on them. If they are in shadows,
they will not be sanitized.
Turning Wand Off
• Press the blue power button to turn off the wand. (Fig. 2)
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)