waterpowered Hello Bidet, User Manual

Page: 10 / 10

10
IT
faucet’s filter holder and that the seal is properly
inserted in its housing with no visible deformation
(Fig. 14);
3. Hold Addy (Fig. 15) pushing up against the faucet
until the seal fully adheres to the filter holder on
the faucet, making sure that:
• The tightening screw (P1) is on the front or side
of the faucet (never in the back);
• Addy follows the inclination of the filter holder,
to allow the seal to adhere completely and
ensure a tight hold (Fig. 16);
• Addy is placed as high as possible with respect to
the filter holder of the faucet (Fig. 17).
Particular cases:
• Some filter holders have a slight indentation:
make sure that the tip of the screws do not lean
in the vicinity of the recess to prevent Addy from
coming off.
• In the case of taps that are slightly flared or
rounded (e.g. some types of kitchen taps),
mount the screws on the straight part of the
filter holder, never on the flared part to avoid
Addy from coming off the tap (Fig. 18).
4. While holding Addy against the tap, tighten the ing
screw (P1) until it is attached to the tap (Fig. 19),
without pressing it too much;
5. Turn the lever bringing it to the closed position
(Fig. 20);
Now you can connect your Hello Bidet (fig. 6b);
6. When you are done, and after disconnecting the
device, put the lever in the open position (Fig. 9)
and, if necessary, loosen the ing screw;
7. After using Addy , allow it to dry and leave the
screw (P1) slightly tightened checking, however,
that the tip of the screws are above and don’t
deform the seal (Fig. 14).
SPARE PARTS AND ACCESSORIES
You can purchase the complete line of Hello Bidet
products on the site www.hellobidet.com or in a
pharmacy.
Handle/handshower : to allow multiple family
members to use the same Hello Bidet product by
simply replacing the shower handle.
“Duck” accessory set : extension that will allow you
to perform a deeper cleansing, with a water jet that
reaches closer to intimate parts.
Universal adapter Addy : allows the use of Hello Bidet
without removing the filter holder from the faucet.
Perfect for travel, hotels or with faucets with non-
standard threads.
Multifunction shower connector : for connecting
Hello Bidet to showers.
Extension
: spiral hose for extending Hello Bidet; for
faucets that are more than 3 meters away.
Hello Bidet filter holder in metal : available with
standard internal and external threads.
Adapters : for faucets with non-standard threads.
The manufacturer, distributors and resellers will
not accept any responsibility for any damages that
may directly or indirectly be caused to persons or
property as a result of the failure to observe all the
requirements indicated in the present user manual as
well as the assembly, use, side effects, warnings, and
maintenance of the product.
For any clarification or information please visit:
www.hellobidet.com or contact customer care by
email at: customer@waterpowered.eu
MANUALE D’USO
LA CONFEZIONE CONTIENE:
• Busta “Special Filter” contenente :
○
Porta filtro speciale con filettatura interna (X)
○
Porta filtro speciale con filettatura esterna (Y)
○
Filtro aeratore (K)
○
Guarnizione (W - con sezione rettangolare) per
porta filtro con filettatura interna
○
Guarnizione (Z - con sezione a “scalino”) per
porta filtro con filettatura esterna
• Innesto (B) con tubo a spirale da 3mt (C), raccordo
(D), impugnatura/doccetta (E) con leva (F)
• Chiave per svitamento porta filtro (G)
• Adattatore universale Addy (O)*
•
Astuccio porta Hello Bidet
• Manuale d’uso multilingue.
Le lettere tra parentesi si riferiscono allo schema
generale.
* Inclusi solo nella confezione “Travel”.
CHE COS’È HELLO BIDET
Hello Bidet è una doccetta bidet che si collega
direttamente al rubinetto e consente di avere il
massimo livello di igiene personale, permettendo
di regolare sia la temperatura dell’acqua che la
pressione.
QUANDO SI USA
Hello Bidet può essere utilizzato in sostituzione del