46
|
53
Pressure Mode
1
1
2
2
Use the illustrations and instructions to operate the
pressure governor in pressure mode. Pressure
mode is available when the
Throttle Ready
and
Pump Engaged
inputs are active, and the
OK To
Pump
input is inactive, if the OK to pump setting is
configured to NORMAL. Or, when the
OK To Pump
input is active and the OK to pump setting is
configured to OK2PUMP.
Configure the settings to adjust the parameters that
effect the pressure mode. Refer to:
the Pressure Governor" on page 35
Do not operate beyond
recommended pressure.
Liquid ejected at high
pressure can cause
serious injury.
High Pressure
•
•
In pressure mode, the pump-discharge
pressure is maintain regardless of the number
of open discharges. Develop and follow
discharge safety protocols to prevent injury.
1 Press the PSI button to enable or disable
pressure mode.
2 Rotate the knob or use the buttons to adjust
the discharge pressure.
