Waterous
200-B Belt-Driven Installation Guide
Rev-
Page 19 of 54
SECTION 8. AUTO-SYNC CONTROL SYSTEM
INSTALLATION
The Auto-Sync control system will have manual or (optional) electric control valves.
A. Manual Valves
FIXED/AUTO Side
RUN/UNLOAD Side
Figure 22 Auto-Sync Manual Valve Assembly
Figure 23 Auto-Sync Control Switches
and Label
Figure 24 Typical Air Pressure
Gauge
Install the control switch assembly and the master air pressure gauge (not included) on
the pump control panel.
1. Turn the control knobs to FIXED and RUN.
2. Loosen the setscrews and remove the knobs and nuts from the front of the
assembly.
3. Remove the label plate.
4. Use the label as a template for making the holes for the control valves and the
mounting bolts, or use the dimensional drawing provided.
5. From the rear, insert the valve stems through the mounting holes.
Summary of Contents for 200-B
