2
ASSEMBLY INSTRUCTIONS
Set up your solar shower in a place that is expo-
sed to direct sunlight as long as possible.
1. Mount the shower base to concrete slab or
wood base with four bolts nuts and gaskets
2. Connect hose adaptor to inlet of shower.
3. Connect garden hose to hose adaptor and
water supply.
4. Insert the holder to shower body.
5. Connect soft hose to shower body and shower
head by hand.
ASSEMBLE
English
FIRST USAGE
1. Turn the shower handle to
FULL ON HOT
position.
NOTE:
Filling tube with valve in hot
position ensures no air pockets are trapped in
shower. This procedure is used for first usage
only.
2. Turn on water supply to garden hose to fill the
shower. It will take about 4 minutes to fill up
shower.
3. When water flows from shower head, turn the
shower handle off. Water begins heating in
tube.
4. Depending on sunlight and outside temperatu-
re, the shower will take about 3 hours to heat
water.
5.
WARNING:
To avoid scald, pay attention to turn
shower handle to
cold water (blue)
direction
before using the shower. Then setting to desi-
red temperature.
Assembly and Operating Instructions solar shower
4
1
2
3
5