background image

 

WLH2 Classe

 Manual 

                                                      Page 12 – Revision: 3-2-2021 

 

WATERLOGIC MANUFACTURED WATER TREATMENT SYSTEM LIMITED WARRANTY 

UNITED STATES AND CANADA ONLY 

 

Waterlogic water treatment systems are guaranteed to the original purchaser to be free of defects 

in materials and workmanship for a period of three (3) years from the date of purchase, but in no 

event longer than forty-eight (48) months from the date of manufacture. Waterlogic Commercial 

Products, LLC (“Waterlogic”) based in the U.S.A. and its affiliated companies are not liable for any 

cost of removal, installation, transportation, or any other charges which may arise in connection 

with a warranty claim. 

 

This warranty does not cover damage or wear to products caused by abnormal operating conditions, 

accident, abuse, misuse, unauthorized or improper alteration or repair, damage caused by or 

resulting from shipping or accident, damage caused by hot water, freezing, flood, fire, or acts of 

God. The effects from chlorine corrosion, scaling and normal wear are specifically excluded from this 

warranty. This warranty does not cover products used outside the countries where the unit was 

purchased and does not cover products that were not installed in accordance with Waterlogic 

printed installation and operating instructions obtained in training or from www.waterlogic.us. 

Failure to follow all instructions for operation and maintenance voids the warranty. This warranty is 

not transferable. 

 

To obtain warranty repairs or replacement, you must obtain a Return Authorization from 

Waterlogic. To obtain a Return Authorization, you must submit a Return Authorization form with 

supporting documentation to Waterlogic for evaluation. The form is available at 

www.waterlogic.us. Supporting documentation must include, but is not limited to; proof of 

purchase, installation date, failure date, and supporting installation and maintenance data.  After 

you submit a Return Authorization form and supporting documentation, Waterlogic will determine 

whether a reasonably apparent defect in materials or workmanship covered by this limited warranty 

exists. If Waterlogic determines the claimed defect is covered by this warranty, Waterlogic will, at its 

sole discretion, determine whether to correct the defect or replace the unit, free of charge to you. If 

Waterlogic determines that the unit should be returned for warranty service, Waterlogic will 

approve of return in writing and will issue a Return Authorization which you must obtain prior to 

shipping the product. You are responsible for the cost of freight in to Waterlogic. 

 

Waterlogic and its affiliated companies hereby limit the duration of any and all implied warranties 

to a maximum period of three (3) years from the date of purchase including, but not limited to, the 

implied warranties of merchantability and fitness for a particular purpose. Some states do not allow 

limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 

Consequential and incidental damages are not recoverable under this warranty. Some states do not 

allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you. 

 

This warranty gives you specific legal rights and you may also have other rights which may vary 

from state to state. 

 

New Warranty Policy issued by Waterlogic Commercial Products LLC, USA - January 10, 2014 

 

Waterlogic Commercials Products LLC

            

Tel: 

(800) 288-1891

 

3175 Bass Pro Drive

                    Website:  

waterlogic.us 

Grapevine, TX 76051 

Summary of Contents for WLH2 Classe










Reviews: