WL900
Foot Pedal Installation Manual
Page 6
-
Revision: 1/5/2021
10.
Once the pedal leads are routed through the exit hole with grommet installed, and routed through
the corrugated sheath, and with all panels reinstalled as well as decorative rings, the pedals can
now be connected to the leads. The connector with blue wire will control ice dispensing, while the
connector with white wire will control water dispensing. Connect each lead to a foot pedal and
using the provided labels, place the corresponding decal over the body of the pedal. Place the
pedals on either side of the machine. Restore connection to power, and reestablish water
connection. Once the machine is connected to water and power, test the pedals for proper
function, and that they are labeled correctly.
**(Hot and Cold shown, but supplied labels should read
“
ICE
”
and
“
WATER
”)