WL900
Manual
Page 52 – Revision: 5-12-2021
3.
Compressor is not Running
Possible Cause
Solution
Compressor Starting
Circuit
Remove cap on side of compress, inspect for damage or
defects.
4.
Unit has Power, but Water is not Chilled and Heated
Possible Cause
Solution
Transformer Failure
Replace Transformer
PCB Power Cable
Connected Improperly
Check connection of power line to the PCB
PCB Failure
Replace PCB
5.
Unit has Power, Front Panel Does not Illuminate or only partially
Illuminates
Possible Cause
Solution
LED Failure
LED boards may have failed, inspect and replace as
needed.
LED Panel Connection
Ensure the connections from the Front Panel LED boards
to the main PCB are made properly and secure.
