WL500
Manual
Page 51 Revision 4‐10‐2019
Step 1
Fasten Support Brackets to the back‐side of the cup holders as shown with the 8 screws provided.
Step 2
Fasten the Cup Dispenser Insert Panel into the Base Cabinet.
Note: This will require maneuvering of the Insert Panel for proper alignment. Take care not to break the
plastic tabs on the Insert Panel.
Step 3
Fasten the Cup Holder Assemblies to the Base Cabinet Door.
WL500
CUP DISPENSER (AK‐0007) DRAWING AND ASSEMBLY INSTRUCTIONS
Cup Dispenser Kit AK‐0007 Contents:
Cup Dispenser Insert Panel
(2) Support Brackets
(2) Cup Dispenser Assemblies
(8) Screws
Cup Dispenser Specifications
Accepts cups from 4 oz. to 14 oz.
Cup Opening Minimum Diameter is 2 ½” (66 mm)
Cup Opening Maximum Diameter is 3 ¼” (84 mm)
