CUBE
Manual
Page 87 – Revision 10‐8‐2018
RESETTING THE HOT TANK OVERLOAD OR HIGH LIMIT SAFETY
1.
Turn off both the Green Heater/Compressor
Switch and the Red Power Switches located on
back of unit
O=OFF
9.
Unplug power to unit.
10.
With a Phillips Head Screwdriver, remove the
two screws at back of the Top Cover if installed.
11.
Remove Top Cover by placing your hands
on the top and pushing the Top Cover
towards the rear.
Lift and remove.
12.
With a Phillips Head Screwdriver, Remove the two screws on the Right‐Side Panel
Remove Right Side Panel.