10)
Lift chimney section
(D)
upwards until it reaches the ceiling. You
must ensure that it is perpendicular to the hood.
o
Mark the side measurements of both sides of chimney section
(D)
on the wall with a pencil and then remove chimney section
(D)
.
11)
Take the flat bracket
(E)
and place it between the two pencil
marks that you made in step 9
o
Keeping the bracket in contact with the wall, use a pencil to
mark on the wall the anchoring holes that are cut out of the
bracket.
23
Summary of Contents for FW100.2BL
Page 27: ...28...
