Waterfall Audio S500EX User Manual Download Page 4

- 3 -

SECTION: CINEMA SET-UP - POWERING A SUB600S

Reminder: 

Connections must be made with all electronics turned off.

Connect the SUB PREOUT output of the Audio-Video processor to the R input (10) in RCA 
or (12) in XLR

Connect the power outputs (11) to the SUB600S

Set the Switch (5) to LFE

Adjust the volume with the potentiometer (8)

Points to note:

Potentiometer (5) FREQ is inactive. The amplifier operates in LFE mode; the cutoff frequency is 
managed directly by the AV processor.

Depending on the “Bass Management” of the Audio-Video processor, phase inversion on the 
Switch (6) may be necessary.

AUDIO-VIDEO PROCESSOR SETTINGS

In the "setup" menu of your A/V processor, configure all speakers in "small" mode. 
Select the crossover frequency: 

80Hz

Continue with the rest of the settings (distance, test tone, etc.). If necessary, refer to the user manual for 
your Audio/Video amplifier.

Reviews: