SET UP OF YOUR AUDIO VIDEO PROCESSOR :
• Configure all speakers in "small" mode
• Choose 120Hz as the crossover frequency.
• Adjust levels and distances
In the case of "auto set up" configurations with microphones, check the
consistency of the settings afterwards.
SET UP OF YOUR WATERFALL AUDIO SUBWOOFER :
•
Switch "24-12-LFE" to the LFE position (note: on LFE the FREQ button
is inactive, the crossover frequency is generated by the processor).
•
Adjust the volume ("LEVEL") as required.
•
PHASE: depending on the processor's bass management settings
and certain distance parameters, phase inversion (180°) may be
necessary.
A good phase connection will give a dense, homogenous sound repro-
duction. A poor phase match is characterised by a lack of energy in the
lower midrange and an overly present high midrange.
ACOUSTIC SET UP AND CONFIGURATION
- 4 -
Connect directly Hurricane in-wall to the speaker sockets of your
amplifier or audio video processor. Make sure that the + and - polarity are
correct.
Never connect two speakers in parallel (or in series) on the
same channel. Never connect your speakers to the mains.
CONNECTION TO YOUR AMPLIFIER
The "Waterfall Audio" cable is made from very high quality deoxygenated
copper that is particularly well suited to your speakers. It is available from
your dealer.
