Storage and maintenance:
- Replace the filter regularly according to the light of the filter life indicator.
- Do not store the filter for a long time, and place it in a dry, cool place when not in use.
- The water source needs to meet the requirements of municipal tap water.
Manufacturer Technical Support
Tel:
1-888-352-3558 (U.S.)
E-mail:
Made in China V001
Qingdao Ecopure Filter Co., Ltd.
Warning:
To reduce the risk of property damage due to water leakage, this filter MUST be installed in accordance with the manufacturer’s
specifications and instructions. Failure to follow instructions and operating specifications will void your warranty. Further,
manufacturer assumes no responsibility or liability for damages arising out of misuse of the product.
Frequently asked questions:
Q:
After filter replacement and flushing, the dispenser displays L1 to prompt a water change.
Can I continue to use it without changing the water?
A:
After the MRO filter is replaced, the dispenser will be automatically flushed for 5 minutes. The
concentrated water produced by flushing will return to the feed water tank, leading to increase of
impurities in feed water. To protect the filter life and keep the freshness of the drinking water, it is
recommended to use it after changing the water in the feed water tank.
Q.
Why does the filtered water taste bad?
A:
The first 3L/102 OZ of water cannot be drunk! After that, it is recommended to flush the whole
filtration dispenser (from water tank to water dispensing) for another 12L/4080 OZ of water, and you
will get the best taste!
If the dispenser has not been used for a while, follow the emptying mode prompt to flush.
If the filter is not replaced in time, please replace the filter immediately.
Q:
Why is the filter life indicator still red after the filter is replaced?
A:
You have forgotten or failed to reset the ” ” key. Please reset it again: Hold the “ ” key for 5
seconds for filter reset.
