There are 8 keys which are used for setting the Time, Timers and operating Modes. The function of
these keys is described below:
HOME
Display current Time of Day or to exit Timers setting.
TIMER
Toggle between
START
and
FINISH
of
Timer 1
and
Timer 2
for summer and then
for winter. Set times can be altered while displayed.
Timer 1 START
Timer 1
FINISH
Timer 2 START
Timer 2
FINISH
Timer 1 START (winter mode)
Timer 1 FINISH (winter mode)
Timer 2 START (winter mode)
Timer 2 FINISH (winter mode)
RESET
Reset time to 0:00 and timers to the default programming.
HOUR
Enable changing the hours for the current time of the day or
Timer Settings
.
Subsequent presses will change the hours immediately.
MIN
When first pressed this key will enable changing the minutes for the current time of
the day or
Timer Settings
. Subsequent presses will change the minutes immediately.
WINTER
By selecting WINTER, hours of operation will be reduced to save energy during the winter
months. Deselecting WINTER will instantly return to increased hours of operation for the
non-winter months (AUTO operation).
SUPER CL
Superchlorination – If the SUPER CL key is pressed once the
Hydrochlor®
will be
set to produce chlorine at maximum level for 24 hours non stop overriding previous
programming and the letter SC will be displayed on the LCD screen. Pressing the
SUPER CL key again when the SC is displayed on the LCD screen will disable the
super chlorination and revert to the original programming.
MODE
Sequences through the modes below:
OFF
All timers off
ON
Timer switch is on all the time
AUTO
Timer are operational according to setting.
Note: MODE does not override SUPER CL.
CHLORINE
PRODUCTION
Set chlorine production level.
CONTROL
