WaterBoss Filter Owner’s Manual
6/13/2012
5
Getting Maximum Efficiency From the Appliance
To achieve the maximum benefit and performance from this appliance, familiarize yourself with this manual and
the appliance.
1.
Should your electricity be off for any reason, check your controller for the correct time and reset as
necessary (See
Setting the Controller
).
2.
Program the appliance to regenerate at a time when the water is not being used. If there is more than one
appliance, allow two hours between each regeneration. For optimum performance, program the water
softener to regenerate first followed by any filter.
3.
If dirt, sand, or large particles are present in the water supply, the appropriate
WaterBoss
®
filter can
eliminate this problem.
4.
Protect the appliance, including the drain line, from freezing.
5.
The bypass valve (located on the main control valve) enables you to bypass the appliance if any work is
being performed on the appliance, well pump, or plumbing. See
Bypass Valve
. Use Bypass position also
for watering plants or lawns with untreated water.
6.
Before putting the appliance back in service after work has been performed, turn on the nearest cold water
tap until water runs clear.
7.
Adhere to all operational, maintenance, and placement requirements.
8.
Potassium permanganate will need to be added periodically to any iron filter.
Summary of Contents for 900IF
Page 35: ...Notes ...
