11
1. Manual backwash knob.
2. 24-hour gear.
3. Skipper wheel shows every other
day backwash.
4. Red pointer.
5. Time of day arrow.
6. Red time set button.
Water Softener Settings, Timer Softeners:
W2B110, W2B300, W2B700
For optimal performance use the online setup wizard to configure your softener.
www.water2buy.com/app
Set the current time
•
Push in the red time set button (6)
•
Adjust the 24hour gear wheel (2)
•
Point the hour arrow (5) is to the current time.
•
The 24hour gear wheel (2) is the rear dial.
•
Let out the red time set button (6)
•
Twist the 24hour gear until it clicks, the click engages the timer
Your water softener has been pre-programmed to regenerate at 2am each
morning.
IMPORTANT: The pins must be pushed out at equal distances apart.
Push in all the pins on the skipper wheel in before beginning the configuration.
Push IN = OFF
Push OUT = ON
Push OUT pins: 2, 4, 6, 8, 10, 12. (equal distances apart.)
