Water Duro Pumps DCJ500, Operating & Installation Instructions Manual

Page: 1 / 12

Convertible Jet Pumps
Models DCJ500 (#6330) & DCJ750 (#6331)
Operating & Installation Instructions
Please read these instructions carefully. Failure to comply with instructions and designed operation of this system may void
the warranty.
Your pump has been carefully packaged at the factory to prevent damage during shipping. However, occasional damage
may occur due to rough handling. Carefully inspect your pump for damage that could cause failure. Report any damage to
your carrier or your point of purchase.
This pump is designed for shallow well installation for water level up to 25 feet, with injector installed on pump body; or for
deep well installation for water level up to 80 feet, with 1-1/4” pipes and injector down in the well. A pressure switch and
pressure gauge are standard features. The pump starts when the pressure drops to a cut-in setting (30 psi) and cut-out
setting (50 psi). The DuroJet Convertible Jet Pump can be mounted to either a pre-charged horizontal pressure tank or used
with a pre-charged free standing pressure tank. The pumps can also be used with conventional air to water tanks. For deep
well applications, replace the short tube in the ejector assembly to long tube #302922 (sold separately).
NOTE: Pre-assembled pump and pre-charged pressure tank packages are also available.
#54806EF Rev. 4/11
Dual Jet
CLICK ANYWHERE on THIS PAGE to RETURN to WATER & WELL PUMP MANUALS & INFORMATION at
InspectApedia.com