4
5
Image 1
3. Fill the filter bottle with 2lt of water and allow to filter into the water
dispenser.
4. Drain and discard the water from the water dispenser using the taps
and repeat point 3 twice more. (until water is clear in the bottom
compartment of the filter bottle.
5. Follow instructions 5 & 6 of water dispenser installation instructions.
Installation of Standard Water Bottle
1. Fill your standard water bottle with water and secure the bottle cap
onto the bottle neck.
2. Invert the bottle and pierce the bottle neck onto the spike in the
middle of the bottle support, ensure the standard bottle is sitting level
on the water dispenser. See Images 1 - 3 above
3. Follow instructions 5 & 6 of water dispenser installation instructions.
Image 2
Image 3
2. Insert the Filter Bottle, with the Bottle Valve attached into the open area
(Reservoir Tank) on top of
the water dispenser,
ensure that the Filter Bottle
sits level on the top of the
water dispenser.
See Images 4 - 5
Image 4
Image 5
Model No.:
V53C
Rated voltage Frequency:
220 - 240V / 50Hz
Rated Cooling Power:
85W
Cold water capacity:
2.0l/h
Refrigerant:
R134a
Optimum Environmental Ambient 10˚C - 32 ˚C
Temperature
Technical Data
Yello
w
SW1
PTC
Green
Compressor Thermostat
E
N
L
Circuit Diagram
