Water Tech Pool Blaster PRO Series Installation Manual Download Page 1

Page: 1 / 4

Installation Guide

Need Help? Contact Customer Care at (732) 967-9888

Replacing the Pool Blaster® PRO Series Motor Box

Your new kit will come with the

following item:

Motor Box (P40X003LI)

Phillips screwdriver or drill

Pliers

You will need the following tools:

STEP 1

: Place the unit flat on a workbench

with motor box away from you and pole side to

the left. Detach motor box cap from motor box.

Remove the ten (10) screws from the side of the

shell and separate shell from unit. Place screws

to the side.

STEP 2

: The motor box, funnel and pole

attachment should be visable now. Remove

funnel and place to side.

Summary of Contents for Pool Blaster PRO Series

Page 2: ...d remove the four 4 screws holding the motor box assembly in place Separate shell from motor box STEP 4 Inspect the side of the shell that has the motor box cap attached to it Notice the metal clip that holds the lanyard to the shell With a pair of pliers gently squeeze clip to open it and remove clip from lanyard Remove motor box cap from shell ...

Page 4: ...tor Box 4 STEP 7 Place shell half with ten 10 screw openings on top of motor box and funnel Insert previously set aside screws into screw openings and tighten with drill or screwdriver STEP 8 Flip unit over and insert four 4 previously set aside screws into screw openings and tighten with drill or screwdriver ...