Water Tech POOL BLASTER CATFISH PPV Use And Care Manual Download Page 2

CONGRATULATIONS on your purchase of a top-quality Water Tech product, which has been 
thoroughly tested to meet our exacting quality control standards.
State of the art Nickel-Metal Hydride batteries power the cleaner.  These are the same bat-
teries used in many portable phones.  In order to properly ventilate and cool the batteries 
and drive system, a certain amount of space is left open in the cleaner body.  As a result, 
from time to time, water may enter the unit. In order to allow for any water to be drained 
you should remove the battery cap after each use, and stand it on its end until the excess 
water is drained.  The amount of water may be very small or not noticed at all.  After remov-
ing any water use a blow dryer on warm setting to dry any moisture build-up on the inside 
of the motor box.  Water entering the cleaner body presents no safety hazard and should 
be drained occasionally to avoid any chance of  long-term corrosion.  The batteries and 
motor in the cleaner are long lasting and proper care will help to prolong the life of your 
appliance. 
These guidelines and safeguards help insure that your new cleaner operates effectively.  
Please read all instructions carefully before using your cleaner. Please take a few moments 
to review the following IMPORTANT INFORMATION before using this tool.

Product Specifications

HANDVAC  

BATTERY

Motor 7.2 Volt, DC 

Charger Rating 120V, 60 Hz AC only (US)

 

240 volts. 50Hz AC only (International)

Switch On-Off 

Charger Voltage 8.4 Volt

ITEM No. 

DESCRIPTION 

PART No. 

QTY.

Vacuum Head 

PBA006 

1

Vacuum Head Brushes (for vinyl pools) 

PBW049 

8

Vacuum Head Wheels (for gunite pools) 

PBW050 

5

Nose Cap 

PBA002 

1

All Purpose Filter Bag/Seal Ring 

PBW022AP 

1

cleaner 

PBA005 

1

Battery Charger 

PBA099* 

1

Spring Clip 

PBW041 

1

ADDITIONAL PARTS:
- Sand & Silt bag (part No. PBW022SS)
- Microfilter Bag (part No. PBW022MF), to be used in conjunction wih Sand & Silt bag
- Shallow Water Hose Attachment (part No. PBASHA)
   * U.S. Charger (part No. PBA099)
   * UK 230V Charger (part No. WT3843)
To purchase parts, go to www.poolbuster.com contact your retailer or call us at (800)298-8800

VAC HEAD

NOSE CAP

HANDLE/ POOL POLE
ATTACHMENT

BATTERY CAP

Summary of Contents for POOL BLASTER CATFISH PPV








Reviews: