26
27
QUICK REFERENCE GUIDE
MANUAL REGENERATION
NOTE:
If you need to initiate a manual regeneration, either immediately, or
the same night at the pre-programmed time for regeneration (typically 2:00
AM), complete the following steps.
For Immediate Regeneration:
Press and hold
�����
until valve motor starts (typically 3 seconds).
For Regeneration the same night:
Press and release
�����
(notice that flashing “REGEN TODAY” appears).
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below. If your valve doesn’t look like the
diagram below, contact your service technician for instructions on how to
shut off water.
“TREATED”
WATER EXITS
SUPPLY
WATER ENTERS
SUPPLY
WATER EXITS
SUPPLY
WATER ENTERS
NORMAL OPERATION
BYPASS OPERATION
GENERAL OPERATION
When the system is operating, one of four displays will be shown:
1. Time of day/gpm
2. Flow rate
3. Capacity remaining
4. Days to a regen
5. Dealer name and phone number
Pressing
����
will toggle between the four choices.
TO SET TIME OF DAY
In the event of a prolonged power outage, time of day flashes, indicating
that this needs to be reset. All other information will be stored in memory
no matter how long the power outage.
1. Accessed by pressing
�����
2. Adjust hours with
+
or
—
buttons, AM/PM toggles at 12
3. Press
����
4. Adjust minutes with
+
or
—
buttons
5. Press
����
6. Adjust current day with
+
or
—
buttons
7. Press
����
to complete and return to normal operation
ERROR
If the display toggles between “Error”
and an error code (i.e. a number), call a
service technician and report the error
code.
ADJUST HARDNESS,
DAYS BETWEEN
REGENERATION, AND TIME
OF REGENERATION
For initial set-up or to make adjustments,
please complete the following steps.
1. Accessed by pressing
����
and
+
button
simultaneously
2. Adjust hardness using
+
or
—
buttons
3. Press
����
4. Adjust days between regenerations using
+
or
—
buttons
5. Press
����
6. Adjust time of regeneration hour with
+
or
—
buttons, AM/PM toggles at 12.
7. Press
����
8. Adjust time of regeneration minutes with
+
or
—
buttons
9. Press
����
10. Turn display backlight ON or OFF with
+
or
—
buttons. Default is ON.
11. Press
����
to complete and return to
normal operation.
ERROR
106
CALL FOR SERVICE
DAYS TO A REGEN
GPM
3
8
CAPACITY REMAINING
GPM
GAL
1600
8
FLOW RATE
GPM
8.0
TIME OF DAY
MON
GPM
2:40
8
PM
PHONE NUMBER
DEALER NA
CURRENT DAY
SET
MON
TIME
MINUTES
SET
TIME
HOUR
SET
2:00
AM
2:00
AM
REGEN TODAY
MON
GPM
2:40
8
PM
REGEN TODAY
and
TIME OF DAY
will flash alternately if a regeneration
is expected tonight.
DAYS BETWEEN REGEN
SET
12
REGEN TIME HOUR
AM
SET
2:00
WATER HARDNESS
GR
SET
20
REGEN TIME MINUTES
AM
SET
2:00
LIGHT NORMALLY
SET
ON
