MODEL: EMPIRE30 / EMBASSY30
INSTALLATION STEP
1) Assemble the back support as shown. Tighten set screw on the escutcheon
and 3-way joint.
2) Assemble support legs as shown. Use a level to ensure the top
escutcheons are straight. Tighten set screws on the 3-way joints, 4-way joints
and all escutcheons.
3) After assembling both sides support legs, attach front bar to join both sides
and tighten set screw.
4) With one person on either side of assembled stand, carefully position the
wash stand in desired location. Use a pencil mark position of wall
escutcheon screw holes on wall as well as the perimeter of the location of
foot flanges on floor.
5) Thread the floor screws with foot flange and screw it into floor.
6) Drill holes on wall for wall escutcheons and push anchors flush with wall
7) Insert the support legs into foot flanges and fasten wash stand to wall with
mounting screws.
8) Apply a thin coat of silicone on the top flanges to secure the counter top to
stand.
(If counter top need slight leveling adjustment, place attached sponge pads
on escutcheons as necessary to stabilize.)
D
A
E