11
OPERATING DISPLAYS AND MAINTENANCE:
1 . GENERAL OPERATION:
When the system is operating, one of six displays may be shown and will alternate with the installing dealer’s name
and phone number for future service (if set). Pressing
NEXT
will alternate between the displays.
1.
Time of Day Screen:
Displays the current time of day, the day of the week, and flow rate.
2. Flow Rate Screen:
Displays the current treated water flow rate through the system in Gallons Per Minute.
3. Vacation Mode Screen:
Allows the system to be “shut down” when there will be no water usage for an extended period of time.
4. Capacity Remaining Screen:
Displays the amount of gallons of treated water remaining until the system triggers a regeneration.
5. Days to a Regen Screen:
Displays the number of days until the system triggers a regeneration. Based on the days override value.
6. Dealer Name Screen:
Displays dealer specific name and phone number. This scrolling display will only appear if set by the dealer.
TIME OF DAY
MON
GPM
2:40
8
PM
FLOW RATE
GPM
8.0
ON VACATION
NO
CAPACITY REMAINING
GPM
GAL
1600
8
DAYS TO A REGEN
GPM
3
8
PHONE NUMBER
DEALER NA
1
4
2
2
5
3
6
If the system has called for a regeneration that will occur at the preset time of regeneration, the words “REGEN TODAY” will appear on the display.
If a water meter is installed, “GPM” flashes on the display when water is being treated, indicating gallons per minute flowing through the system.
2 . VACATION MODE:
This feature may be used to “shut down” the system for a period of time by preventing the unit from regenerating. The
manufacturer has factory set “OFF” as the default. Turn feature “OFF” or “ON” using the
+
or
–
buttons. When turned “ON”, the unit will remain
in Vacation Mode until it is exited. There are two ways that a unit can exit Vacation Mode:
Manually:
The user may manually exit Vacation Mode by changing the setting from “ON” to “OFF”. Once switched off, a delayed
regeneration will queue for that night. Vacation mode may also be manually exited by holding the REGEN button to force an immediate
regeneration.
Automatically:
The unit will automatically exit Vacation Mode once water usage has resumed. After fifty gallons of water is used, the unit
will set to resume normal operation and a delayed regeneration will queue for that night.
NOTE: In some instances, if a regeneration has been queued and the unit is taken out of Vacation Mode (manually or automatically),
the unit will trigger an immediate regeneration instead of a delayed regeneration. For example, if the unit’s maximum Days
Between Regeneration is reached while the unit is in Vacation Mode, an immediate regeneration will trigger as soon as the unit
is taken out of Vacation Mode.
CAUTION: Depending on the severity of water conditions and the length of no water usage, it may not be recommended to use this
feature. Please contact dealer or manufacturer for more information.
3 . REGENERATION MODE:
Typically, a system is set to regenerate at a time of no water usage.
If there is a demand for water when the system is regenerating, untreated water will be delivered.
When the system begins to regenerate, the display will include information about the step of the
regeneration process and the time remaining for that step to be completed. The system runs through
the steps automatically and will reset itself to provide treated water when the regeneration has been
completed.
REGENERATION MODE
BACKWASH
8:22
Current Regen
Cycle Stage
Time Remaining
in Stage
